Glass cutting machine

To ensure that the current equipment is in good condition, usually based on the operating regulations, regularly check for leaks in pipelines, joints, etc., lubricate bearings, pin holes, etc., clean cutting nozzles, cooling water pipes, etc., and complete some routine procedures Work to ensure normal operation.

The maintenance of the mechanical parts and equipment of the automatic glass cutting machine is the daily work necessary to maintain the normal technical status of the equipment and prolong the service life, and it is also one of the main responsibilities of the operator. The maintenance of mechanical parts and equipment of the automatic glass cutting machine has been completed, which can reduce downtime losses and maintenance costs, reduce product costs, ensure product quality, and improve production efficiency. Generally, the maintenance work of automatic glass cutting machine mechanical parts and equipment is divided into two types: daily maintenance and regular maintenance.

The daily maintenance of automatic glass cutting machine mechanical parts and equipment includes two kinds of maintenance every shift and weekend maintenance, which are carried out by the operator. Each shift maintenance requires that the operating staff must do the following during each shift: check all parts of the equipment before the shift, and add oil and lubrication according to the regulations; the prescribed inspection items should be recorded on the inspection card after the inspection, and only after they are normal use equipment.

During the operation of the automatic glass cutting machine mechanical parts and equipment, the equipment should be used in strict accordance with the maintenance operation rules. Pay attention to the operation of the equipment. If abnormalities are found, they should be dealt with in a timely manner. The operator should notify the maintenance worker for inspection and repair, and the maintenance worker should Make an inspection record on the "Trouble Repair Sheet". Before leaving get off work, spend about 15 minutes to carefully clean and wipe the equipment, record the equipment status in the handover book, and go through the handover procedures.